Electric hot water bottle charging precautions

1. Be careful not to let water flow into the power socket, otherwise it will cause a short circuit.

2. It is strictly forbidden for children to use it for those who are insensitive to temperature and those who cannot take care of themselves. Special attention should be paid not to use it for infants.

3. Charging should be placed in a place where children cannot reach 2 meters away, and children are not allowed to operate the charging process.

4. When charging for the first time, you should wait by the side to avoid breaking the bag for too long charging time.

5. When charging, it is strictly forbidden to insert the electric hot water bottle facing down, and do not touch the power cord with your hands or use the electric hot water bottle in your arms.

6. The hot liquid in the electric hot water bag cannot overflow, otherwise it will not heat up when recharging.

7. It is strictly forbidden to stab or beat the surface of the electric hot water bottle, so as to avoid leakage of liquid and electricity.

8. Do not use strong solvents, such as gasoline and other cleaning agents, when cleaning, and do not soak the electric hot water bag in water for cleaning.

9. Do not pull out the plug of the water injection port to ensure good air tightness.

10. It is strictly forbidden for users to inject any liquid into the electric water heater.

11. The hot water bottle should be exhausted once after being charged 15-20 times.

Can thehot water bottle be unplugged before it is fully charged?

Many impatient friends unplug the hot water bag without waiting for the light to be fully charged. Can the hot water bag be fully charged? In fact, the charging hot water bag can be unplugged before it is fully charged. There are no special requirements, nor Danger. The normal charging time of the charging hot water bottle is 5-10 minutes, the hot weather is short and the cold time is long. Usually, there will be a charging indicator on the hot water bottle. When the green light is off and the red light is on, it indicates that the temperature has reached the set value, and immediately unplug the power cord. In actual use, the feeling of heat shall prevail, and there is no need to wait for the temperature control device to act, and immediately unplug the power cord when the bag body rises.

On the contrary, if the charging time is too long, the water vapor in the bag will increase, causing the bag body to rise significantly, and there will be a danger of bursting. It is not advisable to press the hot water bottle when sleeping. If the temperature is too high, it may cause burns. At the same time, if the hot water bottle is of poor quality, the hot water bottle will burst and cause burns.

Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,cervical spine hot water bag, plush hot water bottle.