It's important to use hot water bottles correctly!

Avoid contact with acid, alkali and oily substances. In daily life, do not put hot water bottle in contact with acid, alkali or oily substances. If it is accidentally touched, remember to wipe it off immediately. If long-term contact with these acids, alkalis and oily substances, it will lead to the shortening of the service life of the hot water bag.

Avoid using soap to clean hot water bag. If the appearance of hot water bag is dirty, you want to clean it at this time. Please do not eat soapy water and use clean cleaning directly. Remember to dry with cloth after washing. In the process of waiting for drying, pay attention not to bake directly next to the open flame, otherwise it is easy to aging, hard, and shorten its service life.

Avoid the hot water bag is direct sunlight, if you do not usually to the hot water bag, at this time can be placed in a cool and dry place, and do not put directly in the sun, otherwise the hot water bag is very easy to crack, or appear hard phenomenon. Once this happens, the hot water bag will lose its use value.

Appropriate to blow some air in the bag and then preserve, when not using the hot water bag, we can properly blow some air into the bag, so that it is filled with the whole hot water bag, to avoid the hot water bag rubber due to long-term not use and stick together. If it sticks together, such hot water bag must be scrapped, if you insist on using it will certainly be unsafe.

Pay attention to the correct pouring of water to the hot water bag. When pouring water into the hot water bag, we can not directly pour the boiling water into it, but let the water temperature drop to 80~90℃ before pouring into it. If we pour the hot water just boiled directly every time, it is easy to accelerate the aging of the hot water bag rubber, thus shortening its service life.

Pour water into the hot water bag can not be too full, generally speaking, the boiling water into the hot water bag, can not be loaded too slowly, basically to the hot water bag two-thirds or four-fifths, is OK. If the water is too full, it is likely to expand and contract because of the heat, and let the hot water bag bad changes.

Pay attention to avoid contact with hard things, daily use of hot water bag, do not let it collide with hard things, once the collision, it is likely to leave scratches on the hot water bag, and even lead to the hot water bag was scratched, affecting its normal use.

Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,,cervical spine hot water bag, plush hot water bottle.