U-shaped PVC hot water bag usage guide: Water filling, hot compress application and daily maintenance tips
Release date: [2026/11/16]  Read total of [8] times

After the Start of Winter, the temperature gradually drops. The U-shaped PVC hot water bottle which can fit the shoulders and neck, warm hands easily, and does not require electricity, has become a common warm-up item in many households and office settings. As a manufacturer that has been producing PVC hot water bags for many years, Changzhou Yuefeng Plastic Products Co., Ltd. has provided the following explanations on the proper use of this type of product from a practical perspective.


1. Standardize water filling and perform basic safety operations

The U-shaped hot water bag has a special shape, so attention should be paid to the water filling operation. When filling the bag, it should be kept upright. It is recommended to use 40–60℃ warm water and avoid directly pouring boiling water into it. Hot water at high temperatures will accelerate the aging of the PVC material, increasing the probability of bag deformation and leakage.

The water volume should not be filled to the brim. About two-thirds of the total capacity should be injected. After filling the warm water, gently squeeze the bag to remove the excess air inside and then tighten the sealing plug. After tightening the plug cover, dry the bag opening and invert it for a moment to observe whether there is any leakage at the filling port. Then, proceed with the use. The internal space of the U-shaped structure is arc-shaped, and if the exhaust is not thorough, the residual air in the bag will expand due to heat, increasing the internal pressure of the bag. Completing the exhaust steps can reduce safety hazards.


2. Use for both hot and cold applications, and master the correct usage method

The U-shaped hot water bag is mainly used for heat application on the shoulders and neck. It is not recommended to use the bag directly against the skin. It is recommended to pair it with a cloth cover or place a thin towel between it and the neck to avoid causing low-temperature burns from prolonged local contact. The recommended single heat application time is within 20 minutes. Do not use it all night against the body; if discomfort such as skin redness and stinging occurs during use, stop using immediately.

When used by the elderly, those with slow skin perception, or children, they should be watched and cared for by family members or adults to avoid the risk of burns. These U-shaped hot water bags also support both hot and cold uses. In summer, fill it with cold water to use as a cold application tool, which is suitable for more daily scenarios; the water temperature for cold application should not be too low to avoid frostbite.


3. Conduct checks and storage to extend product lifespan

Before and after each use, simply check the bag body to observe whether the U-shaped bag body, filling port, and sealing plug have cracks, discoloration, aging, or leakage traces. If any damage or bulging occurs, stop using it immediately.

After use, empty the water in the bag completely, wipe the bag opening and body clean, and place it in a ventilated and cool location to dry. Avoid direct sunlight exposure and high-temperature heat sources such as heaters. When storing, do not forcefully bend or press the arc-shaped part of the U-shaped structure, keep sharp objects away from the bag, and prevent scratches on the PVC bag body.


4. Purchase and product description

Changzhou Yuefeng Plastic Products Co., Ltd.'s U-shaped PVC hot water bottle uses imported environmentally friendly PVC raw materials. Each product undergoes an air pressure test before leaving the factory and can be supplied to domestic customers and export customers.

Good heating items, safety first. Mastering the correct water filling, usage, and storage methods can better experience the warmth brought by the hot water bag. If customers have any product inquiries, customization, or purchase needs, please contact our company for communication and exchange.


Changzhou Yuefeng Plastic Products Co., Ltd. specializes in the production of hot water bottle, PVC hot water bottle, hand warm hot water bottle, cold water sack, insert hot water bottle,cervical spine hot water bag, plush hot water bottle.